Mobra chamber frame JUF/2 is used within cable chambers, for use with joints and termination boxes. The frame suits standard joint box/cable cha...

Mobra chamber mounting arm long, is a pivot arm for use with mobra chamber brackets JUF/4-6 (Medium) and JUF/10 (Large). Mobra Arms are used to ...

Mobra chamber mounting arm short, is a pivot arm for use with mobra small chamber bracket JUF/2. Mobra Arms are used to house and protect fibre ...

Fixing bracket 32 is a galvanised steel drop wire “J” shaped bracket with a welded loop and four pre-drilled holed plate at the other end. Maint...

Fixing bracket 51 is a galvanised steel drop wire “L” shaped bracket with a welded loop and pre-drilled holed plate at the other end. Maintenanc...

Ring Polehead Dropwire is a galvanised steel 240mm ring x 16mm diameter bolt fitted to wooden poles, often referenced as a transmission pole, te...

Triangular fixing bracket 22 is a galvanised steel drop wire triangular bracket fixing with three holes and a welded loop. Maintenance engineers...

Coach screws are a heavy-duty fastener that are also known as lag bolts or lag screws. They are primarily used for holding together heavy timber...

Connector Bend NO1, often referenced as "Elephants foot" due to its shape is a capping adaptor for use at distribution points for connecting 90m...

Iron Anchor 4 is a galvanised steel anchor designed for use for concrete structures. Maintenance engineers embed the anchor into the wall, where...

Nail’s bonding nails are used to fix capping steel to wooden telegraph poles. Often referenced as a transmission pole, telephone pole, telecommu...

Pole Step NO1 is used for wooden poles as so often referenced as a transmission pole, telephone pole, telecommunication pole, power pole, hydro ...

Mobra chamber frame JUF/10 is used within cable chambers, for use with joints and termination boxes. The frame suits standard joint box/cable ch...

Mobra chamber mounting brackets, are corner mounting brackets that allow mobra no drill brackets to be used within plastic cable chambers.

Fixing bracket 44 is a galvanised steel drop wire “L” shaped bracket with a welded loop and pre-drilled holed plate at the other end. Maintenanc...

5/8 swivel stay is used in conjunction with the anchor screw and is used to tighten the tension on the cable. This system is replacing turnbuckl...

Bolt 25 bolts are used to secure ring supports for the top of telegraph poles, allowing wiring and cabling to be secured safely.

Bolt 25...

Cable bearer locking pins are used to secure the bracket to the wall type cable bearer. Which are fixed to the walls of BT underground chambers ...

Capping Steel Elbow 10 is manufactured pre-drilled ready for fixing to wooden poles. Often referenced as a transmission pole, telephone pole, te...

Capping Steel Elbow 9 connects 90mm to 19mm capping steel NO1. This part is manufactured pre-drilled ready for fixing to wooden poles. Often ref...

Capping Steel NO1 is a 2440mm long x 76mm wide galvanised steel section, with a 19mm internal radius section, pre-drilled ready for fixing to wo...

Capping Steel N10 is a 2485mm long x 75mm wide galvanised steel section with a 17.5mm radius, pre-drilled ready for fixing to wooden poles. Ofte...

Cover Capping Steel N10 is a galvanised steel section, pre-drilled ready for fixing to wooden poles. Often referenced as a transmission pole, te...